论坛: 公开讨论 (Thread #40719)

RTS & CTS handshaking not working in Teraterm (2019-05-07 07:58 by ckeays #82938)

I am using Teraterm as a serial terminal to send files to a microcontroller.

I test my device in all other terminals like hyperterminal, brays, and many others. The hardware handshaking is working in every one except TeraTerm. I have connected the DTR pin to both DSR and CD just to see if it would work, however it does not.

Just wondering if anyone else is having this problem.

Any help would be well appreciated.
(最后更新: 2019-05-07 07:59 by ckeays)

Re: RTS & CTS handshaking not working in Teraterm (2020-02-03 20:09 by yegorich #84255)

Reply To Message #82938
> I am using Teraterm as a serial terminal to send files to a microcontroller.
>
> I test my device in all other terminals like hyperterminal, brays, and many others. The hardware handshaking is working in every one except TeraTerm. I have connected the DTR pin to both DSR and CD just to see if it would work, however it does not.
>
> Just wondering if anyone else is having this problem.
>
> Any help would be well appreciated.

I have tried both version 4.104 and current SVN trunk. In both versions TeraTerm reacts properly if the other side raises the RTS signal i.e. Tera Term stop sending and resumes when RTS is "low". ZMODEM worked too.
回复到 #82938