[Ttssh2-commit] [3294] LogMeTT 2.9. 5 に差し替えた。

svnno****@sourc***** svnno****@sourc*****
2009年 4月 7日 (火) 23:10:17 JST


Revision: 3294
          http://svn.sourceforge.jp/view?root=ttssh2&view=rev&rev=3294
Author:   maya
Date:     2009-04-07 23:10:17 +0900 (Tue, 07 Apr 2009)

Log Message:
-----------
LogMeTT 2.9.5 に差し替えた。
  インストーラに LogMeTT のインストーラを含めるようにした。

Modified Paths:
--------------
    trunk/doc/en/html/about/history.html
    trunk/doc/ja/html/about/history.html
    trunk/installer/teraterm.iss

Added Paths:
-----------
    trunk/libs/logmett/

Removed Paths:
-------------
    trunk/installer/release/LogMeTT.exe
    trunk/installer/release/LogMeTT_README.txt
    trunk/installer/release/LogMeTT_license.txt
    trunk/installer/release/LogMeTTc.exe
    trunk/installer/release/SynComp.pro
    trunk/installer/release/TTLEdit.exe
    trunk/installer/release/logmett.chm
    trunk/installer/release/runltt.exe
    trunk/installer/release/ttmacro.tpl


-------------- next part --------------
Modified: trunk/doc/en/html/about/history.html
===================================================================
--- trunk/doc/en/html/about/history.html	2009-04-07 10:15:40 UTC (rev 3293)
+++ trunk/doc/en/html/about/history.html	2009-04-07 14:10:17 UTC (rev 3294)
@@ -55,6 +55,7 @@
   <li>Misc
     <ul>
       <li>upgraded TTSSH version supporting SSH2 to <a href="#ttssh_2.51">2.51</a></li>
+      <li>upgraded LogMeTT to 2.9.4</li>
     </ul></li>
 
 </ul>

Modified: trunk/doc/ja/html/about/history.html
===================================================================
--- trunk/doc/ja/html/about/history.html	2009-04-07 10:15:40 UTC (rev 3293)
+++ trunk/doc/ja/html/about/history.html	2009-04-07 14:10:17 UTC (rev 3294)
@@ -55,6 +55,7 @@
   <li>‚»‚Ì‘¼
     <ul>
       <li><a href="#ttssh_2.51">SSH2‘ΉžTTSSH(2.51)</a>‚֍·‚µ‘Ö‚¦‚½</li>
+      <li>LogMeTT 2.9.5‚֍·‚µ‘Ö‚¦‚½</li>
     </ul></li>
 
 </ul>

Deleted: trunk/installer/release/LogMeTT.exe
===================================================================
(Binary files differ)

Deleted: trunk/installer/release/LogMeTT_README.txt
===================================================================
--- trunk/installer/release/LogMeTT_README.txt	2009-04-07 10:15:40 UTC (rev 3293)
+++ trunk/installer/release/LogMeTT_README.txt	2009-04-07 14:10:17 UTC (rev 3294)
@@ -1,600 +0,0 @@
-                      Introduction to LogMeTT
-                      =======================
-
-LogMeTT is the application that works together with popular freeware terminal
-emulator TeraTerm.
-
-LogMeTT helps to create, keep organized and easily accessible connection scripts
-written on TeraTerm Macro language. Those who frequently connect to the same
-remote sites using telnet, SSH1/SSH2 or modem connections can find LogMeTT as
-the very useful tool saving them a lot of time.
-
-LogMeTT keeps TeraTerm macro scripts in a hierarchical tree structure that at
-certain degree can be considered as graphical representation of network topology.
-Every script has corresponding item in LogMeTT popup menu that appears from the
-icon in Windows system tray. Thus each predefined connection scenario is always
-just 2 clicks away from the user. Tree type of script organization allows to
-reuse "parent" scripts while connecting to the "child" nodes and saves additional
-time while creating and keeping updated TeraTerm macros. Any connection or whole
-tree of connections can be saved in a binary file and distributed among the group
-of people that need to access the same remote nodes.
-
-LogMeTT has built in TeraTerm Macro language command highlighter and context
-sensitive Macro language help that assists in creating new scripts and improves
-their readability. It also provides several typical connection templates that can
-be studied and used as the examples while writing TeraTerm macros.
-
-LogMeTT allows to associate specific color schema to each connection that reduces
-the chance of human error while working with multiple TeraTerm windows on the
-same desktop.
-
-With LogMeTT user can select group of connection macros and execute them together.
-Multiple TeraTerm windows will be opened and tiled automatically on the desktop.
-This feature is especially convenient if TeraTerm Broadcast mode has to be used.
-
-LogMeTT allows to run the scripts based on predefined schedules that can automate
-lots of routine tasks like periodic data collection from remote sites, performing
-configuration backups etc.
-
-LogMeTT extends TeraTerm macro language with the set of keywords that can contain
-user and connection specific variables.
-
-LogMeTT is freeware application distributed without the source code.
-
-More details can be found in LogMeTT.chm file.
-
-
-Please visit LogMeTT support forum for more information:
-http://www.neocom.ca/forum/index.php
-
-
-                 LogMeTT Releases and features
-                 =============================
-                 (in reverse chronological order)
-
-2008-06-07 (Ver 2.9 Release 4)
-New features added:
-- Adding new node activates node name editor.
-
-Bugs fixed:
-- New popup menu component introduced in version 9.2.3 was incorrectly
-rendering menu structure and had possible memory leak issue. This is
-fixed now.
-- "Cut" operation applied to Tree nodes was updating icons incorrectly.
-- Connection tree branches were not collapsing when "This computer" node
-was selected.
-- Opening LTT file could turn into Import when unsaved previous
-LTT file was loaded and 'Cancel' opening button was pressed in Warning
-dialog box.
-
-
-
-2008-06-01 (Ver 2.9 Release 3)
-New features added:
-- Replaced Popup menu component to simplify menu structure. The
-same menu can be used to start the macro and to open submenu. In
-the previous versions such item was duplicated into it's own submenu.
-- Added keyword $snippet$. This key word disables direct access to
-the macro from LogMeTT popup menu. It is case-insensitive and can
-be places anywhere within a Macro code. Example of use case: Node
-"ABC" contains few starting lines of Macro code that are common for
-all child node macros. The Macro linked to node "ABC" should never be
-executed apart from child macros. Key word $snippet$ placed inside
-the macro code attached to node "ABC" will restrict user from calling
-this macro separately.
-- Updated LogMeTT help file to reflect all the latest changes.
-
-Bugs fixed:
-- Restore TeraTerm configuration menu option was staying disabled
-after saving configuration at first time.
-- Fixed trailing spaces not being entered in Popup editor.
-- Switching tabs was marking node content as "Modified"
-- Node data was not showing up after certain sequence of clicks on
-tree nodes and the Tabs in the right part of LogMeTTC window.
-- Fixed the bug with Macro export into TTL file.
-
-2007-07-23 (Ver 2.9 Release 2)
-New features added:
-- Application was redesigned to support Microsoft Windows Vista and Windows XP themes.
-- Replaced hardcoded macro Templates with the plain text file 'ttmacro.tpl' that can
-be used as reference for building personal template library.
-- Added configurable name of Templates file to avoid overwriting custom templates
-during upgrades.
-- Added tracking of admin rights when running under Windows Vista. Without admin rights
-Vista does not allow to associate file extension with the application. Use ‘Run as
-Administrator’ from Vista popup menu or change the properties of LogMeTTC.exe to be
-always started as Administrator.
-- 'About' window was combined with Disclaimer message. It also contains 'What's new' tab.
-- 'Help' menu is now calling Vista compatible LogMeTT and TeraTerm help files in .chm
-format instead of old file with extension .hlp. This applies also to Context sensitive
-help in editor area. LogMeTT help file however does not reflect all changes introduced in
-this release.
-- Functionality of 'Print' speed button changed from showing Print Dialog to immediate
-printing. Print Dialog is still accessible from File->Print… menu.
-- Added 'Show Special Characters' option and speed button.
-- All previously hardcoded keywords used by syntax highlighter were migrated to external
-KeyFile.ini file. This will allow to add new key words without recompiling the application.
-KeyFile.ini also contains Help ID-s that are used by context sensitive help.
-- Upgraded Virtual Tree component to version 4.5.2
-- Added shortcuts F11 - "Run all selected" and F12 - "Apply Changes".
-- Added support of $[1]..$[8] key words that can be used as command line parameters for
-RunLTT application.
-- Added column selection mode. Use mouse while pressing <Alt> key to select columns in
-Macro editor.
-Bugs fixed:
-- Fixed the error happening while duplicating expanded branch of the Connections tree.
-- Fixed node path that was appearing in reverse order in Print Preview window and in the
-header of printouts.
-- Lots of other changes, code cleanup and bug fixing of 3rd party freeware components used
-by LogMeTT and LogMeTTC.
-
-
-
-2007-03-28 (Ver 2.9 Release 1)
-New features added:
-- Standalone TeraTerm Macro Editor - TTLEditor was created. It inherited all features
-of LogMeTT Macro Editor of version from version 2.8 release 6 and also got few new ones.
-TTLEditor supports drag and drop of plain text files and can be associated with file
-extension TTL.
-- Both LogMeTT Macro Editor and TTL Editor now support syntax completion proposal feature.
-Press [Ctrl-Space] while typing macro command and resizeble hint window will appear.
-- LogMeTT popup menu now has "IP Address" item that opens into sub menu allowing to
-release/renew IP address for any or all network adapters or check adapter details.
-- File extension association functions were rewritten.
-- "Do not Prompt on disconnect" option was added to Settings window. It applies to
-TeraTerm windows opened in "Run All Selected" mode.
-
-Bugs fixed:
-- Few minor fixes and code optimization.
-
-
-2006-07-24 (Ver 2.8 Release 5)
-New features added:
-- None.
-
-Bugs fixed:
-- Fixed (finally) sporadic application error that was happening while closing Configuration
-Utility. The error was triggered by the conflict of 2 freeware Delphi components (SynEdit
-and XPMenu) that are used in LogMeTTc.
-
-
-2006-07-03 (Ver 2.8 Release 4)
-New features added:
-- Added progress bar to LogMeTT Configuration Utility splash screen.
-
-Bugs fixed:
-- Reduced startup time of LogMeTT Configuration Utility.
-- Fixed (hopefully) sporadic application error that was happening while closing Configuration Utility.
-
-
-2006-03-19 (Ver 2.8 Release 3)
-New features added:
-- Added Information window under "File -> Information for" menu. It shows statistical
-information about currently loaded Connections tree.
-- Minor other changes and code optimization.
-
-Bugs fixed:
-- None.
-
-
-2006-03-13 (Ver 2.8 Release 2)
-New features added:
-- Added mpause and random macro commands to syntax highlighter.
-- Added Splash window at Configuration Utility startup.
-- Updated Teraterm Macro help. Added recently introduced mpause and random macro commands
-- Upgraded LogMeTT Installation Utility to CreateInstall Free v4.3 from www.createinstall.com
-
-Bugs fixed:
-- Fixed the problem starting Cygwin when the PATH environmental variable does not contain the path to cygwin1.dll
-
-
-2006-01-17 (Ver 2.8 Release 1)
-New features added:
-- Added Operation Highlighting ( + - * / % and or xor not).
-- Added text search and replace functionalities in currently open Macro. Menu items Find, Find Next, Find Previous, Replace under menu Search.
-- Added Maximize, Hide and Restore options for Connection Tree.
-- Added View menu.
-- Added multi tab navigation among pages with Settings.
-- Added Syntax highlighting setup page.
-- Added ability to start macro from configuration window when other then Macro editor page is selected.
-- Updated LogMeTT help file to reflect these changes.
-
-Bugs fixed:
-- None.
-
-
-2006-01-12 (Ver 2.7 Release 5)
-New features added:
-- In addition to TeraTerm.ini file backup and restore, LogMeTT now also performs backup
-and restore of cygterm.cfg file.
-
-Bugs fixed:
-- The bug was fixed when after importing .LTT file with the connection having non-unique
-name the existing connection was being renamed as "Copy of" instead of newly imported connection.
-
-
-2005-11-16 (Ver 2.7 Release 4)
-New features added:
-- None.
-
-Bugs fixed:
-- The bug was fixed when after dragging and dropping the node with subnodes in
-Connection tree subnode level related data was becoming corrupted.
-- Virtual Tree component from Soft-Gems used in Configuration window was upgraded
-to version 4.4.2. For list of improvements and bug fixes visit
-http://www.soft-gems.net/VirtualTreeview/VTHistory.php
-
-
-2005-11-14 (Ver 2.7 Release 3)
-New features added:
-- Two new node related key words were added. They are $parent$ and $PARENT$.
-These key words are similar to key words $connection$ and $CONNECTION$ with only
-difference that parent node's captions are being substituted instead. Keyword
-highlighter and LogMeTT help file were updated to reflect this new feature.
-
-Bugs fixed:
-- Few minor fixes and code optimization not affecting the functionality.
-
-Other issues:
-- Starting November 7th, 2005 Neocom Solutions carries new name "Neocom Ltd." From
-this date Neocom Ltd. appears as copyright owner of all software products
-distributed from NeoCom.ca web site unless stated otherwise. It also owns
-NeoCom.ca web site itself.
-
-
-2005-10-15 (Ver 2.7 Release 2)
-New features added:
-- 9 new TeraTerm Macro system variables from 'groupmatchstr1' to 'groupmatchstr9'
-that are introduced in TeraTerm 4.22 were added to syntax highlighter.
-
-Bugs fixed:
-- Job scheduler was starting to work from the second minute after LogMeTT start
-instead of starting from the end of the current minute.
-- The problem with check for updates algorithm was fixed when tray icon was
-keeping to flash if upgrade to the latest version was done from "outside" LogMeTT.
-
-
-2005-10-11 (Ver 2.7 Release 1)
-New features added:
-- The 3rd page of settings was added to LogMeTT Configuration Window.
-Press 'Next' button 2 times to reach it. The page contains default settings
-for Colors and Logging for newly created connections.
-- Teraterm.ini color settings were added to the set of predefined color
-schemas on Colors tab.
-- The whole algorithm of checking for updated versions via Internet was
-replaced. Manual check option was added to 'Help' menu. Also the interval
-to check for updates can be set on the first 'Settings' page. Available
-options are:  every day, every 3 days, every 7 days, every 14 days, every
-30 days, never. At maiden installation the option 'Never' is selected by
-default (as per suggestion of PaVel). Before performing actual upgrade user
-will get the list of new features and bugs fixed in newly released version.
-Upgrade procedure will automatically shut down LogMeTT and start downloading
-new version of TeraTerm or LogMeTT. While upgrading TeraTerm user gets option
-to perform teraterm.ini backup.
-- 'waitregex' macro command and variable 'matchstr' were added to syntax
-ighlighter.
-- Both LogMeTT and Macro help files were updated.
-
-Bugs fixed:
-- The major problem with checking for newer releases introduced in the previous
-release was fixed.
-- If no default printer installed, application interface was crashing and error
-message was popping up all the time.
-- The problem with scheduler was fixed when day of the month setting was
-overwriting day of the week setting. Thanks to Victor for reporting.
-- Lots of other minor fixes and code optimisation.
-
-
-2005-08-08 (Ver 2.6 Release 1)
-New features added:
-- Print, Print Preview and Printer Setup functions were added. They are
-reachable from File menu of LogMeTT Configuration window and allow to print
-the macro associated to currently selected node. Functions are available only
-when Macro page is visible.
-- As per request of LogMeTT users the functionality of checking for updated
-versions of TeraTerm and LogMeTT was changed. LogMeTT now check for updates
-on startup and then once every 24 hours of running. This functionality can be
-disabled by selecting newly added checkbox "Do not connect the Internet to
-check for newer versions" on Settings page of Configuration window.
-- Help file was updated to reflect these new changes.
-Bugs fixed:
-- None.
-
-
-2005-07-31 (Ver 2.5 Release 7)
-New features added:
-- Additional option "Do not connect the Internet to check for newer versions"
-was added to Settings page of Configuration window. Thanks to PaVel for
-suggesting this feature. By default this option is not selected and LogMeTT
-connects to neocom.ca web site to check for updated versions of TeraTerm and
-LogMeTT. The first check is performed on application startut and the every
-3 hours.
-Bugs fixed:
-- None.
-
-2005-07-22 (Ver 2.5 Release 6)
-New features added:
-- None.
-Bugs fixed:
-- Memory utilisation issues were addressed. In some cases allocated memory was
-reduced up to 20 times.
-- Hourglass icon was mistakenly appearing in tray area when new releases of
-LogMeTT or TeraTerm are published on the web.
-
-
-2005-07-19 (Ver 2.5 Release 5)
-New features added:
-- LogMeTT icon has the shape of hourglass while reloading data.
-- Further improvement of LogMeTT popup menu redrawing function.
-- Added filter on $phone$, $mobile$ and $pager$ variables to pass into macro only
-the following characters: 0..9 # * + , P p. Other characters can still appear on
-Settings page but will be stripped from the macro code.
-Example: "(123) 456-7890" will be converted to "1234567890". Help file was updated.
-- LogMeTT_README.txt file updated.
-Bugs fixed:
-- Interaction between LogMeTT.exe and LogMeTTc.exe was optimized.
-- Double click on tray icon under certain conditions was causing application to crash.
-
-2005-08-08 (Ver 2.6 Release 1)
-New features added:
-- Print, Print Preview and Printer Setup functions were added. They are reachable from
-File menu of LogMeTT Configuration window and allow to print the macro associated to
-currently selected node. Functions are available only when Macro page is visible.
-- As per request of LogMeTT users the functionality of checking for updated versions
-of TeraTerm and LogMeTT was changed. LogMeTT now check for updates on startup and then
-once every 24 hours of running. This functionality can be disabled by selecting newly
-added checkbox "Do not connect the Internet to check for newer versions" on Settings
-page of Configuration window.
-- Help file was updated to reflect these new changes.
-Bugs fixed:
-- None.
-
-2005-07-13 (Ver 2.5 Release 4)
-New features added:
-- None.
-Bugs fixed:
-- It was not possible to drag and drop connection between 2 separator lines.
-- Additional restrictions were added on drag and drop operations inside the
-  connection tree.
-- Fixed the bug in 'Reverse Colors' function.
-- The function checking for duplicate connection names was not working correctly
-under certain conditions.
-
-2005-07-04 (Ver 2.5 Release 3)
-New features added:
-- LogMeTT popup menu redrawing function was improved.
-- LogMeTT installer created.
-
-Bugs fixed:
-- Parent level macro was being executed twice when started from LogMeTT popup menu.
-Thanks to suibian for reporting this bug.
-
-2005-06-28 (Ver 2.5 Release 2)
-New features added:
-- None.
-Bugs fixed:
-- 'Run All Selected' function from 'Actions' menu was not working correctly.
-
-2005-06-21 (Ver 2.5 Release 1)
-New features added:
-- LogMeTT.hlp file was created. LogMeTT Configuration window is supporting now
-context sensitive help that can be called by pressing <F1>.
-- Context sensitive help for LogMeTT key words in Macro editor was added. It can
-be called by placing cursor on the word and pressing <Ctrl-F1> (the same applies
-to TeraTerm macro commands).
-- Current value of LogMeTT key words appears on <Ctrl-Click> on these key words
-in Macro editor.
-- LogMeTT key words are being highlighted in Macro editor with red color.
-- Current line is being highlighted in Macro editor.
-- Further improvement of 'Run to cursor' function. From now it does not depend
-on selection within Macro editor but runs from the first line of the macro down
-to the line containing the cursor (inclusive).
-- TeraTerm.ini file backup/restore functions were added into
-'File' -> 'TeraTerm Configuration' menu. They help to preserve user's settings
-during TeraTerm upgrades.
-- $CONNECTION$, $ttdir$, $windir$, $logfilename$ and $LOGFILENAME$ key words were
-added. See LogMeTT help for their descriptions.
-- URL color was added. This feature is still not fully supported by TeraTerm.
-- 'CygWin' menu was added to LogMeTT popup menu and to 'Actions' menu of
-Configuration Screen. It is only visible if Cygwin is installed.
-- Additional option 'Start CygWin' was added to the list of functions called on
-double click on tray icon.
-- Logging when checkbox 'Start logging when macro ends' is selected is now disabled
-when 'Run to cursor' or 'Run branch to cursor' function is executed from
-Configuration window.
-- The second page of Settings was added.
-- Most recently used files can appear with or without full path in 'File' menu based
-on configuration setting.
-- Fonts of menus and Macro editor are configurable. The font from Macro editor will
-also be used in TeraTerm main window. Preferable character set can be also selected.
-- The behaviour of <Tab> key in macro editor is now configurable.
-- The format of LTT file changed. The files created by earlier versions of LogMeTT
-will be backed up and converted automatically when first opened in Configuration
-window.
-Bugs fixed:
-- Temporary file were not clean up properly.
-- Fixed bug with scheduler starting 3 copies of the macro in some cases.
-- Lots of other minor fixes and code optimisation.
-
-
-2005-04-13 (Ver 2.4 Release 4)
-New features added:
-- Context sensitive help was added to macro editor. When macro command is
-selected in macro editor, pressing <Ctrl-F1> will open corresponding page in
-macro.hlp file.
-- Shortcuts to 'TeraTerm Help' and 'TeraTerm Macro Language Help' in 'Help' menu
-of Configuration window changed to <Shift-Ctrl-F1> and <Shift-F1>.
-- 'Run to Cursor' functionality was improved and now there is no need to select
-part of the macro to run it. 'Run to Cursor' will itself execute part of the
-macro from the first line to the end of the line containing cursor. The same
-applies to 'Run branch to cursor' function.
-- Help file macro.hlp was modified and contains now updated information about
-the syntax of command connect.
-- LogMeTT_README.txt file was updated.
-Bugs fixed:
-- Function 'Run to cursor' in certain cases was not properly expanding the
-selection to the end of the last selected line.
-- Several macro language commands were not highlighted.
-- Double click was not selecting the numbers in Macro editor.
-
-
-2005-04-08 (Ver 2.4 Release 3)
-New features added:
-- Added $mobile$ and $pager$ key words. Their values can be assigned in the
-Settings tab of Configuration window.
-Bugs fixed:
-- None.
-
-2005-03-29 (Ver 2.4 Release 2)
-New features added:
-- Added $logdir$ key word variable. It is being substituted with the full path
-to 'Logs' folder that is under TeraTerm home directory.
-Sample: 'C:\Program Files\teraterm\Logs\'
-Bugs fixed:
-- When connection marked in status bar as 'Modified' and focus is in
-connections tree, pressing Ctrl-A was not updating the right part of
-configuration window.
-- When connection marked in status bar as 'Modified'
-
-2005-03-27 (Ver 2.4 Release 1)
-New features added:
-- Added automatic macro execution based on the schedule.
-- Added 8 macro templates for different types of connection under
-'File' -> 'Import macro template' menu of Configuration window.
-Bugs fixed:
-- LogMeTT was showing up in Windows Task Bar and staying there in some cases
-after closing Popup message. - The function stripping macro command 'END' from
-the parent macros was removed since it could affect functionality of certain
-complex macro scripts.
-- Line and Column numbers in status bar were shown vice versa.
-- Automatic expansion of selected part of the macro in 'Run to cursor' mode was
-not working after adding syntax highlight feature.
-
-2005-03-22 (Ver 2.3 Release 3)
-New features added:
-- LogMeTT tray icon is now flashing when the new versions of either LogMeTT or
-TeraTerm are available for downloading (only when PC is connected to the
-Internet).
-- Upgrade related 2 menu items were moved from Help menu of Configuration window
-into LogMeTT popup menu. There are visible only when the newer versions of
-software are available for downloading.
-Bugs fixed:
-- Key word $CONNECTION$ was not correctly substituted for parent macros.
-
-2005-03-20 (Ver 2.3 Release 2)
-Bugs fixed:
-- Macros started from Coniguration window were always including all parent macros.
-- Fixed Internal error happenning when user was clicking in macro editor area
-while being in connection name editing mode.
-- Modifyed the way default log file name is generated.
-
-2005-03-18 (Ver 2.3 Release 1)
-New features added:
-- Macro language syntax highliting feature was added to macro editor. It is
-active when 'Connecton colors in Macro editor' option is switched off.
-- New panel was added to status bar showing line and column number of caret
-location inside macro and popup editor boxes.
-- The information about freeware Delphi components used in LogMeTT was added to
-About window.
-- Added dynamic font size change based on screen resolution in Configuration
-window.
-- Import/Export menu items were migrated under File menu of Configuration
-window.
-- Menu 'Macro' was renamed to 'Actions'.
-Bugs fixed:
-- When modifyed macro was executed from Configuration window it was
-automatically applied to current connection even without pressing Apply button.
-- Optimized speed buttons refresh procedure.
-- NumLock, CapsLock and ScrollLock were not showing up on Configuration window
-start.
-
-2005-03-15 (Ver 2.2 Release 4)
-Bugs fixed:
-- Another problem caused by double click on LogMeTT tray icon was fixed.
-- The problem related to restoration of Configuration window placement was
-fixed.
-
-2005-03-14 (Ver 2.2 Release 3)
-Bugs fixed:
-- The error messages was showing on double click LogMeTT icon on the very first
-run of application.
-
-2005-03-14 (Ver 2.2 Release 2)
-Bugs fixed:
-- LockWorkStation function was causing LogMeTT to fail under Windows 98.
-- New version related info was not displayed properly under Help menu of
-Configuration window.
-
-2005-03-13 (Ver 2.2 Release 1)
-New features added:
-- Modified the way LogMeTT Popup menu is called. It shows up only on Right click
-from now.
-- Added double click actions support to LogMeTT tray icon. The actions are
-configurable from Settings tab of Configuration screen.
-- Redesigned Color setting page.
-- Added several predefined color schemas.
-- Introduced pop up hint showing IP address on the PC when mouse is over LogMeTT
-tray icon.
-Bugs fixed:
-- Text selection change when using mouse in connection name editor was not
-updating the states of the speed buttons (Cut, Copy, Paste, etc.)
-- The colors were not always updated after changing selected node.
-- Double click of on LTT file was causing opening of the file instead of
-Importing it.
-- On moving the nodes Save button was not becoming active.
-- Temp_TTL directory was not emptied on exit from LogMeTT.
-- INS/OVR should not be showing when not in text editor mode.
-- Updated setting were not passed to LogMeTT immediately but only after closing
-Configuration window.
-- On node change when in Modified state, answering "Cancel" on question whether
-to save changes was causing lose of the changes.
-- Last selection was lost if opening Configuration screen from LogMeTT.
-- Added restriction of dropping the node on itself and on separator line.
-- When clicking on speed buttons some of them were repainted incorrectly while
-switching to disabled state.
-
-2005-02-28 (Ver 2.1 Release 1)
-New features added:
-- Added auto scrolling on expand connection tree.
-- Added auto scrolling of the tree while dragging the node.
-- Added check for updates menu items for LogMeTT and TeraTerm under Help menu.
-- Added Expand All and Collapse All menu items.
-- Introduced new version numbering major.minor.build.
-- On collapsing the branch where one of the child nodes was being edited prompt
-was added to notifying user that the changes can be lost.
-Bugs fixed:
-- Cut/Copy/Paste buttons were enabled mistakenly when no node selected.
-- Disabled 'Run selected' menu whenever not applicable.
-- Fixed 'Last updated' message not showing in status bar is some cases.
-- Moving the node using drag & drop between 2 separator lines was not working.
-- Disabled TTermPro and LogMeTTc menu items in LogMeTT if they are not in
-current directory.
-- Temporarily disabled transparency when connection starts from LogMeTT since
-this is affecting color settings. Transparency support will be available as an
-option in one of the future LogMeTT releases.
-- File Import was not working on double click on LTT file in Windows Explorer.
-- On exit from LogMeTT Configuration window was not closing.
-
-
-2005-02-22 (Ver 2.03 beta)
-- Added support on shortcuts for Cut/Copy/Paste operations while editing
-Connection name.
-- Fixed the bug causing the last node in the tree to disappear or to show on the
-wrong level.
-
-2005-02-20 (Ver 2.02 beta)
-- New feature added. The macro can now contain keyword $CONNECTION$ that will be
-substituted during macro execution with the first word from connection name.
-Thanks to Manfred for suggesting this feature. Check posting
-http://www.neocom.ca/forum/viewtopic.php?t=47 for more details.
-- Minor bug fixed related to update of right part of the window on tree node
-selection change.
-
-2005-02-19 (Ver 2.01 beta)
-Beta version of LogMeTT that is completely redesigned LogMeIn application was
-released. About 95% of the source code was rewritten.
-
-=========================
-LogMeTT is freeware application distributed without the source from
-NeoCom Ltd. web site www.neocom.ca
-NeoCom Ltd. is the solo Copyright owner of LogMeTT.
\ No newline at end of file

Deleted: trunk/installer/release/LogMeTT_license.txt
===================================================================
--- trunk/installer/release/LogMeTT_license.txt	2009-04-07 10:15:40 UTC (rev 3293)
+++ trunk/installer/release/LogMeTT_license.txt	2009-04-07 14:10:17 UTC (rev 3294)
@@ -1,68 +0,0 @@
-                      Freeware License Agreement
-                      --------------------------
-
-This Freeware Software License Agreement, applies to all software products
-available for download from NeoCom.ca website that are labeled as freeware.
-All software available for download from NeoCom.ca website are copyright NeoCom
-Ltd. unless stated otherwise.  Copyright law protects this software program
-and all associated materials. NeoCom Ltd.  retains title to and ownership
-in the copyright of the software program and the associated  materials.
-
-Freeware License Rights: All software products available for download from
-NeoCom.ca website,  unless labeled otherwise, are provided as freeware.
-Freeware products are provided free of  charge. Occasionally the copyright
-holder may post a request for a donation in support of  this software. This type
-of request does not change the classification of this software as  freeware.
-Freeware software may be used as many times as you like, for as long as you
-like.  You may copy and distribute copies of this program. You must not charge
-money or fees for the  software product to anyone except to cover distribution
-costs. The copyright holder reserves  the right to reclassify this software as a
-non-freeware product at a later date (i.e. shareware  of public domain). Doing
-so will not modify the license agreement of previously distributed  executables.
-You may not modify, reverse-engineer, decompile, disassemble, or otherwise
-discover  or disassemble the software. You do not have the right to create
-derivative works of the Software  and you agree not to attempt to reverse
-engineer and/or modify the Software’s source code. You  may not rent, lend,
-assign, lease or transfer rights to the software.
-
-Warranty: This program is provided "as is" without warranties of any kind,
-either expressed or  implied, including, but not limited to, the implied
-warranties of merchantability and fitness  for a particular purpose. The entire
-risk as to the quality and performance of the program is  with you. Should the
-program prove defective, you assume the cost of all necessary servicing,  repair
-or correction. In no event will any copyright holder be liable to you for
-damages,  including any general, special, incidental or consequential damages
-arising out of the use or  inability to use the program (including but not
-limited to loss of data or data being rendered  inaccurate or losses sustained
-by you or third parties or a failure of the program to operate  with any other
-programs).
-
-Technical Support: Technical support may be provided via e-mail and/or website
-postings. While  every effort will be made to provide timely technical support
-no guarantees whatsoever are implied  that technical support will be provided or
-that technical support, when provided, will be accurate.  Freeware software
-offered from NeoCom.ca website is basically unsupported and supplied on an as-is
-basis.
-
-Code distribution: Occasionally portions of the source code of this software may
-be provided via  e-mail or posting on associated website. Any such source code
-is provided as public domain, unless  labeled otherwise. Public domain code is
-not copyrighted. Such code is released to the public  domain as a service to the
-programming community. You may use it for any purpose whatsoever without
-restriction, for free, and without giving credit to the author(s).
-
-Agreement: By using this software product you are automatically agreeing to and
-show that you have  read and understood the terms and conditions contained
-within this Freeware Software License  Agreement. This Freeware Software License
-Agreement is then effective while you use and continue to  make use of these
-software products. If you do not agree with this Freeware Software License
-Agreement you must not use software products downloaded from NeoCom.ca website -
-this Freeware  Software License Agreement will then not apply to you. This
-Freeware Software License Agreement is  subject to change without notice.
-
-Any company names, logos, mottoes and product names mentioned or shown on
-associated website or in  software products may be copyright, trademarked or
-registered trademarked by their respective  owners.
-
-
-Copyright (C) 2004-2007, NeoCom Ltd.

Deleted: trunk/installer/release/LogMeTTc.exe
===================================================================
(Binary files differ)

Deleted: trunk/installer/release/SynComp.pro
===================================================================
--- trunk/installer/release/SynComp.pro	2009-04-07 10:15:40 UTC (rev 3293)
+++ trunk/installer/release/SynComp.pro	2009-04-07 14:10:17 UTC (rev 3294)
@@ -1,208 +0,0 @@
-# ##########################################################################################
-# This is Syntax Completion Proposal definition file for TeraTerm Macro language.
-# File name: SynComp.pro
-# Created: February 11, 2007
-# Author:  Boris Maisuradze
-# Last updated: February 15, 2008
-# The file is used by applications LogMeTT and TTLEdit.
-# The file has to be stored in TeraTerm installation directory.
-# Press <CTRL-Space> while in macro editor to activate Syntax Completion Proposal.
-# For questions and support visit TeraTerm support forum at http://www.neocom.ca/forum
-# You are free to modify this file, however please keep above notice unchanged.
-# ##########################################################################################
-
-
-# Communication commands
-
-BplusRecv::command \column{}\style{+B}BplusRecv \style{-B}
-BplusSend::command \column{}\style{+B}BplusSend \style{-B}<filename>
-CallMenu::command \column{}\style{+B}CallMenu \style{-B}<menu ID>
-ChangeDir::command \column{}\style{+B}ChangeDir \style{-B}<path>
-ClearScreen::command \column{}\style{+B}ClearScreen \style{-B}<int>
-CloseTT::command \column{}\style{+B}CloseTT \style{-B}
-Connect 'myserver:23 /nossh'::command \column{}\style{+B}Connect \style{-B} 'myserver:23 /nossh'
-Connect 'myserver:22 /ssh /1'::command \column{}\style{+B}Connect \style{-B} 'myserver:22 /ssh /1'
-Connect 'myserver:22 /ssh /1 /auth=password /user=username /passwd=password'::command \column{}\style{+B}Connect \style{-B} 'myserver:22 /ssh /1 /auth=password /user=username /passwd=password'
-Connect 'myserver:22 /ssh /1 /auth=publickey/user=username /passwd=password /keyfile=private-key-file'::command \column{}\style{+B}Connect \style{-B} 'myserver:22 /ssh /1 /auth=publickey/user=username /passwd=password /keyfile=private-key-file'
-Connect 'myserver:22 /ssh /2'::command \column{}\style{+B}Connect \style{-B} 'myserver:22 /ssh /2'
-Connect 'myserver:22 /ssh /2 /auth=password /user=username /passwd=password'::command \column{}\style{+B}Connect \style{-B} 'myserver:22 /ssh /2 /auth=password /user=username /passwd=password'
-Connect 'myserver:22 /ssh /2 /auth=publickey/user=username /passwd=password /keyfile=private-key-file'::command \column{}\style{+B}Connect \style{-B} 'myserver:22 /ssh /2 /auth=publickey/user=username /passwd=password /keyfile=private-key-file'
-Connect 'myserver /timeout=<value>'::command \column{}\style{+B}Connect \style{-B} '/timeout=<value>'
-Connect '/C=x'::command \column{}\style{+B}Connect \style{-B} '/C=x'
-CygConnect::command \column{}\style{+B}CygConnect \style{-B}
-CygConnect::command \column{}\style{+B}CygConnect \style{-B}<command line parameters>
-Disconnect::command \column{}\style{+B}Disconnect \style{-B}
-EnableKeyb <flag>::command \column{}\style{+B}EnableKeyb \style{-B} <flag>
-FlushRecv::command \column{}\style{+B}FlushRecv \style{-B}
-GetTitle <strvar>::command \column{}\style{+B}GetTitle \style{-B} <strvar>
-KmtFinish <filename>::command \column{}\style{+B}KmtFinish \style{-B} <filename>
-KmtGet <filename>::command \column{}\style{+B}KmtGet \style{-B} <filename>
-KmtRecv::command \column{}\style{+B}KmtRecv \style{-B}
-KmtSend <filename>::command \column{}\style{+B}KmtSend \style{-B} <filename>
-LoadKeymap <filename>::command \column{}\style{+B}LoadKeymap \style{-B} <filename>
-LogClose::command \column{}\style{+B}LogClose \style{-B}
-LogOpen <filename> <binary flag> <append flag>::command \column{}\style{+B}LogOpen \style{-B} <filename> <binary flag> <append flag>
-LogPause::command \column{}\style{+B}LogPause \style{-B}
-LogStart::command \column{}\style{+B}LogStart \style{-B}
-LogWrite <string>::command \column{}\style{+B}LogWwrite \style{-B} <string>
-QuickVanRecv::command \column{}\style{+B}QuickVanRecv \style{-B}
-QuickVanSend <filename>::command \column{}\style{+B}QuickVanSend \style{-B} <filename>
-Recvln::command \column{}\style{+B}Recvln \style{-B}
-RestoreSetup <filename>::command \column{}\style{+B}RestoreSetup \style{-B} <filename>
-ScpRecv::command \column{}\style{+B}ScpRecv \style{-B} <remote filename>
-ScpRecv::command \column{}\style{+B}ScpRecv \style{-B} <remote filename> [<local filename>]
-ScpSend::command \column{}\style{+B}ScpSend \style{-B} <filename>
-ScpSend::command \column{}\style{+B}ScpSend \style{-B} <filename> [<destination filename>]
-Send <data1> <data2> ...::command \column{}\style{+B}Send \style{-B} <data1> <data2> ...
-SendBreak::command \column{}\style{+B}SendBreak \style{-B}
-SendFile <filename> <binary flag>::command \column{}\style{+B}SendFile \style{-B} <filename> <binary flag>
-SendKCode <key code> <repeat count>::command \column{}\style{+B}SendKCode \style{-B} <key code> <repeat count>
-Sendln <data1> <data2> ...::command \column{}\style{+B}Sendln \style{-B} <data1> <data2> ...
-SetBaud <value>::command \column{}\style{+B}SetBaud \style{-B} <value>
-SetEcho <echo flag>::command \column{}\style{+B}SetEcho \style{-B} <echo flag>
-SetSync <sync flag>::command \column{}\style{+B}SetSync \style{-B} <sync flag>
-SetTitle <title>::command \column{}\style{+B}SetTitle \style{-B} <title>
-ShowTT <show flag>::command \column{}\style{+B}ShowTT \style{-B} <show flag>
-TestLink::command \column{}\style{+B}TestLink \style{-B}
-Unlink::command \column{}\style{+B}Unlink \style{-B}
-Wait <string1> <string2> ...::command \column{}\style{+B}Wait \style{-B} <string1> <string2> ...
-WaitEvent <events>::command \column{}\style{+B}WaitEvent \style{-B} <events>
-Waitln <string1> <string2> ...::command \column{}\style{+B}Waitln \style{-B} <string1> <string2> ...
-WaitRecv <sub-string> <len> <pos>::command \column{}\style{+B}WaitRecv \style{-B} <sub-string> <len> <pos>
-WaitRegex <string1 with regular expression> <string2 with regular expression> ...::command \column{}\style{+B}WaitRegex \style{-B} <string1 with regular expression> <string2 with regular expression> ...
-XmodemRecv <filename> <binary flag> <option>::command \column{}\style{+B}XmodemRecv \style{-B} <filename> <binary flag> <option>
-XmodemSend <filename> <option>::command \column{}\style{+B}XmodemSend \style{-B} <filename> <option>
-ZmodemRecv::command \column{}\style{+B}ZmodemRecv \style{-B}
-ZmodemSend <filename> <binary flag>::command \column{}\style{+B}ZmodemSend \style{-B} <filename> <binary flag>
-
-# Control commands
-
-Break::command \column{}\style{+B}Break \style{-B}
-Call <label>::command \column{}\style{+B}Call \style{-B} <label>
-Do::command \column{}\style{+B}Do \style{-B}
-Do [{ while | until } <int> (option)]::command \column{}\style{+B}Do \style{-B} [{ while | until } <int> (option)]
-End::command \column{}\style{+B}End \style{-B}
-ExecCmnd <statement>::command \column{}\style{+B}ExecCmnd \style{-B} <statement>
-Exit::command \column{}\style{+B}Exit \style{-B}
-For <intvar> <first> <last>::command \column{}\style{+B}For \style{-B} <intvar> <first> <last>\style{+B}Next\style{-B}
-Next::command \column{}\style{+B}For \style{-B} <intvar> <first> <last>\style{+B}Next\style{-B}
-Goto <label>::command \column{}\style{+B}Goto \style{-B} <label>
-If <int> Then::command \column{}\style{+B}If \style{-B} <int> \style{+B}Then\style{-B} <statement 1> \style{+B}[ ElseIf \style{-B}<int 2> \style{+B}Then \style{-B}<statement 2> \style{+B}] [ Else\style{-B} <statement 3> \style{+B}]  EndIf\style{-B}
-Then::command \column{}\style{+B}Then\style{-B} <statement 1> \style{+B}[ ElseIf \style{-B}<int 2> \style{+B}Then \style{-B}<statement 2> \style{+B}] [ Else\style{-B} <statement 3> \style{+B}]  EndIf\style{-B}
-ElseIf::command \column{}\style{+B}ElseIf \style{-B}<int 2> \style{+B}Then \style{-B}<statement 2> \style{+B} [ Else\style{-B} <statement 3> \style{+B}]  EndIf\style{-B}
-Else::command \column{}\style{+B}Else\style{-B} <statement 3> \style{+B}  EndIf\style{-B}
-EndIf::command \column{}\style{+B}EndIf\style{-B}
-Include <include file name>::command \column{}\style{+B}Include \style{-B}<include file name>
-Loop::command \column{}\style{+B}Loop \style{-B}
-Loop [{ while | until } <int> (option)]::command \column{}\style{+B}Loop \style{-B} [{ while | until } <int> (option)]
-Mpause <time>::command \column{}\style{+B}Mpause \style{-B}<time>
-Pause <time>::command \column{}\style{+B}Pause \style{-B}<time>
-Return::command \column{}\style{+B}Return \style{-B}
-Until <int>::command \column{}\style{+B}Until \style{-B}<int>\style{+B}... EndUntil\style{-B}
-EndUntil::command \column{}\style{+B}EndUntil \style{-B}
-While <int>::command \column{}\style{+B}While \style{-B}<int>\style{+B}... EndWhile\style{-B}
-EndWhile::command \column{}\style{+B}EndWhile \style{-B}
-
-# String operation commands
-
-Code2Str <strvar> <ASCII code>::command \column{}\style{+B}Code2Str \style{-B}<strvar> <ASCII code>
-Int2Str <strvar> <integer value>::command \column{}\style{+B}Int2Str \style{-B}<strvar> <integer value>
-Sprintf FORMAT [argument]>::command \column{}\style{+B}Sprintf \style{-B}FORMAT [argument]
-Str2Code <intvar> <string>::command \column{}\style{+B}Str2Code \style{-B}<intvar> <string>
-Str2Int <intvar> <string>::command \column{}\style{+B}Str2Int \style{-B}<intvar> <string>
-StrCompare <string1> <string2>::command \column{}\style{+B}StrCompare \style{-B} <string1> <string2>
-StrConcat <strvar> <string>::command \column{}\style{+B}StrConcat \style{-B}<strvar> <string>
-StrCopy <string> <pos> <len> <strvar>::command \column{}\style{+B}StrCopy \style{-B} <string> <pos> <len> <strvar>
-StrLen <string>::command \column{}\style{+B}StrLen \style{-B}<string>
-StrScan <string> <substring>::command \column{}\style{+B}StrScan \style{-B}<string> <substring>
-ToLower <strvar> <string>::command \column{}\style{+B}ToLower \style{-B}<strvar> <string>
-ToUpper <strvar> <string>::command \column{}\style{+B}ToUpper \style{-B}<strvar> <string>
-
-# File operation commands
-
-FileClose <file handle>::command \column{}\style{+B}FileClose \style{-B}<file handle>
-FileConcat <file1> <file2>::command \column{}\style{+B}FileConcat \style{-B}<file1> <file2>
-FileCopy <file1> <file2>::command \column{}\style{+B}FileCopy \style{-B}<file1> <file2>
-FileCreate <file handle> <filename>::command \column{}\style{+B}FileCreate \style{-B}<file handle> <filename>
-FileDelete <filename>::command \column{}\style{+B}FileDelete \style{-B}<filename>
-FileMarkPtr <file handle>::command \column{}\style{+B}FileMarkPtr \style{-B}<file handle>
-FileOpen <file handle> <file name> <append flag>::command \column{}\style{+B}FileOpen \style{-B}<file handle> <file name> <append flag>
-FileReadln <file handle> <strvar>::command \column{}\style{+B}FileReadln \style{-B}<file handle> <strvar>
-FileRename <file1> <file2>::command \column{}\style{+B}FileRename \style{-B}<file1> <file2>
-FileSearch <filename>::command \column{}\style{+B}FileSearch \style{-B}<filename>
-FileSeek <file handle> <offset> <origin>::command \column{}\style{+B}FileSeek \style{-B}<file handle> <offset> <origin>
-FileSeekBack <file handle>::command \column{}\style{+B}FileSeekBack \style{-B}<file handle>
-FileStrSeek <file handle> <string>::command \column{}\style{+B}FileStrSeek \style{-B}<file handle> <string>
-FileStrSeek2 <file handle> <string>::command \column{}\style{+B}FileStrSeek2 \style{-B}<file handle> <string>
-FileWrite <file handle> <string>::command \column{}\style{+B}FileWrite \style{-B}<file handle> <string>
-FileWriteln <file handle> <string>::command \column{}\style{+B}FileWriteln \style{-B}<file handle> <string>
-FindFirst <dir handle> <file name> <strvar>::command \column{}\style{+B}FindFirst \style{-B}<dir handle> <file name> <strvar>
-FindNext <dir handle> <strvar>::command \column{}\style{+B}FindNext \style{-B}<dir handle> <strvar>
-FindClose <dir handle>::command \column{}\style{+B}FindClose \style{-B} <dir handle>
-GetDir <strvar>::command \column{}\style{+B}GetDir \style{-B}<strvar>
-MakePath <strvar> <dir> <name>::command \column{}\style{+B}MakePath \style{-B}<strvar> <dir> <name>
-SetDir <dir>::command \column{}\style{+B}SetDir \style{-B}<dir>
-
-# Password commands
-
-DelPassword <filename> <password name>::command \column{}\style{+B}DelPassword \style{-B}<filename> <password name>
-GetPassword <filename> <password name> <strvar>::command \column{}\style{+B}GetPassword \style{-B}<filename> <password name> <strvar>
-PasswordBox <message> <title>::command \column{}\style{+B}PasswordBox \style{-B}<message> <title>
-PasswordBox <message> <title>::command \column{}\style{+B}PasswordBox \style{-B}<message> <title> [<special>]
-
-# Miscellaneous commands
-
-Beep::command \column{}\style{+B}Beep \style{-B}
-ClosesBox::command \column{}\style{+B}ClosesBox \style{-B}
-Clipb2Var <strvar>::command \column{}\style{+B}Clipb2Var \style{-B}<strvar>
-Clipb2Var <strvar> [<offset>]::command \column{}\style{+B}Clipb2Var \style{-B}<strvar> [<offset>]
-Exec <command line>::command \column{}\style{+B}Exec \style{-B}<command line>
-FileNameBox <title>::command \column{}\style{+B}FileNameBox \style{-B} <title>
-GetDate <strvar>::command \column{}\style{+B}GetDate \style{-B}<strvar>
-GetEnv <envname> <strvar>::command \column{}\style{+B}GetEnv \style{-B}<envname> <strvar>
-GetTime <strvar>::command \column{}\style{+B}GetTime \style{-B}<strvar>
-GetVer <strvar>::command \column{}\style{+B}GetVer \style{-B}<strvar>
-GetVer <strvar> [<version>]::command \column{}\style{+B}GetVer \style{-B}<strvar> [<version>]
-IfDefined <var>::command \column{}\style{+B}IfDefined \style{-B}<var>
-InputBox <message> <title>::command \column{}\style{+B}InputBox \style{-B}<message> <title>
-InputBox <message> <title>::command \column{}\style{+B}InputBox \style{-B}<message> <title> [<default> [<special>]]
-MessageBox <message> <title>::command \column{}\style{+B}MessageBox \style{-B}<message> <title>
-MessageBox <message> <title>::command \column{}\style{+B}MessageBox \style{-B}<message> <title> [<special>]
-Random <integer variable> <max value>::command \column{}\style{+B}Random \style{-B}<integer variable> <max value>
-RotateLeft <intvar> <intval> <count>::command \column{}\style{+B}RotateLeft \style{-B}<intvar> <intval> <count>
-RotateRight <intvar> <intval> <count>::command \column{}\style{+B}RotateRight \style{-B}<intvar> <intval> <count>
-SetDate <date>::command \column{}\style{+B}SetDate \style{-B}<date>
-SetDlgPos <x> <y>::command \column{}\style{+B}SetDlgPos \style{-B}<x> <y>
-SetEnv <envname> <strvar>::command \column{}\style{+B}SetEnv \style{-B}<envname> <strvar>
-SetExitCode <exit code>::command \column{}\style{+B}SetExitCode \style{-B}<exit code>
-SetTime <time>::command \column{}\style{+B}SetTime \style{-B}<time>
-Show <show flag>::command \column{}\style{+B}Show \style{-B}<show flag>
-StatusBox <message> <title>::command \column{}\style{+B}StatusBox \style{-B}<message> <title>
-StatusBox <message> <title>::command \column{}\style{+B}StatusBox \style{-B}<message> <title> [<special>]
-Var2Clipb <string>::command \column{}\style{+B}Var2Clipb \style{-B}<string>
-YesNoBox <message> <title>::command \column{}\style{+B}YesNoBox \style{-B}<message> <title>
-YesNoBox <message> <title>::command \column{}\style{+B}YesNoBox \style{-B}<message> <title> [<special>]
-
-# Variables
-
-GroupMatchStr1::variable \column{}\style{+B}GroupMatchStr1 \style{-B}
-GroupMatchStr2::variable \column{}\style{+B}GroupMatchStr1 \style{-B}
-GroupMatchStr3::variable \column{}\style{+B}GroupMatchStr1 \style{-B}
-GroupMatchStr4::variable \column{}\style{+B}GroupMatchStr1 \style{-B}
-GroupMatchStr5::variable \column{}\style{+B}GroupMatchStr1 \style{-B}
-GroupMatchStr6::variable \column{}\style{+B}GroupMatchStr1 \style{-B}
-GroupMatchStr7::variable \column{}\style{+B}GroupMatchStr1 \style{-B}
-GroupMatchStr8::variable \column{}\style{+B}GroupMatchStr1 \style{-B}
-InputStr::variable \column{}\style{+B}InputStr \style{-B}
-MatchStr::variable \column{}\style{+B}MatchStr \style{-B}
-Param2::variable \column{}\style{+B}Param2 \style{-B}
-Param3::variable \column{}\style{+B}Param3 \style{-B}
-Param4::variable \column{}\style{+B}Param4 \style{-B}
-Param5::variable \column{}\style{+B}Param5 \style{-B}
-Param6::variable \column{}\style{+B}Param6 \style{-B}
-Param7::variable \column{}\style{+B}Param7 \style{-B}
-Param8::variable \column{}\style{+B}Param8 \style{-B}
-Param9::variable \column{}\style{+B}Param9 \style{-B}
-Result::variable \column{}\style{+B}Result \style{-B}
-Timeout::variable \column{}\style{+B}Timeout \style{-B}
-

Deleted: trunk/installer/release/TTLEdit.exe
===================================================================
(Binary files differ)

Deleted: trunk/installer/release/logmett.chm
===================================================================
(Binary files differ)

Deleted: trunk/installer/release/runltt.exe
===================================================================
(Binary files differ)

Deleted: trunk/installer/release/ttmacro.tpl
===================================================================
--- trunk/installer/release/ttmacro.tpl	2009-04-07 10:15:40 UTC (rev 3293)
+++ trunk/installer/release/ttmacro.tpl	2009-04-07 14:10:17 UTC (rev 3294)
@@ -1,234 +0,0 @@
-; ********** PLEASE DO NOT MODIFY THE FOLLOWING FILE DESCRIPTION **************
-; FILE NAME:    ttmacro.tpl 
-; AUTHOR:       Boris Maisuradze
-; LAST UPDATED: 10-Jun-2007
-; DESCRIPTION:
-;  This file contains macro Templates used by TTLEdit and LogMETTc applications.
-;  The file can store any number of templates each starting with header
-;  [MACRO_TEMPLATE <template name in File menu>] followed by the actual macro 
-;  code. Templates end either with the header of next the template, or the end 
-;  of ttmacro.tpl file. Special header type [MACRO_TEMPLATE SEPARATOR] allows to 
-;  visually separate/group template names in the menu. Separator header is not 
-;  followed by macro code. 
-;
-;  This file is part of TTLEditor/LogMeTT freeware package developed for 
-;  TeraTerm PRO versions 4.x and higher. 
-;
-; For the latest versions and support visit http://www.neocom.ca/forum
-;
-; Copyright (c) Neocom Ltd. 2007.
-; ********** PLEASE DO NOT MODIFY THE TEXT ABOVE THIS LINE ********************
-
-[MACRO_TEMPLATE Telnet Session] 
-; ******* LogMeTT Macro Template for Telnet session ******* 
-; Substitute words inside angle brackets with corresponding values 
-; and delete angle brackets. 
-; 
-; Openning telnet connection using port 23 
-connect '<server_name_or_IP_address>:23 /nossh' 
-; 
-; Entering synchronous communication mode (useful in most cases) 
-setsync 1 
-; 
-; Assigning new title to TeraTerm window 
-settitle 'Connecting <Server_name_or_site_name>' 
-; Another way of assigning title using LogMeTT key word 
-; settitle 'Connecting $connection$' 
-; 
-; Waiting for Login prompt from remote side 
-wait 'ogin:' 
-; 
-; Sending user name 
-sendln '<user_name>' 
-; Another way of sending user name using LogMeTT key word 
-; sendln '$user$' 
-; 
-; Waiting for Password prompt from remote side 
-wait 'assword:' 
-; 
-; Calling Popup window to type in password 
-passwordbox 'Enter password' 'Login' 
-sendln inputstr 
-; Previous 2 lines can be replaced with hardcoded password (not recommended) 
-; sendln '<password>' 
-; 
-; Assigning final title to TeraTerm window 
-settitle 'Connected to <Server_name_or_site_name>' 
-; 
-
-[MACRO_TEMPLATE SEPARATOR] 
-
-[MACRO_TEMPLATE SSH1 Session] 
-; ******* LogMeTT Macro Template for SSH1 session ******* 
-; Substitute words inside angle brackets with corresponding values 
-; and delete angle brackets. 
-; 
-; Openning SSH1 connection using port 22. 
-; User will be prompted for username and password 
-connect '<server_name_or_IP_address> /ssh /1' 
-; 
-; Entering synchronous communication mode(useful in most cases) 
-setsync 1 
-; 
-; Assigning new title to TeraTerm window 
-settitle 'Connected to <Server_name_or_site_name>' 
-; 
-
-[MACRO_TEMPLATE SSH1 Session with Credentials] 
-; ******* LogMeTT Macro Template for SSH1 session with credentials ******* 
-; Substitute words inside angle brackets with corresponding values 
-; and delete angle brackets. 
-; 
-; Calling Popup window to get username 
-inputbox 'Enter username' 'Login' 
-; Assigning the value entered by user to variable _user 
-_user=inputstr 
-; Calling Popup window to get password 
-passwordbox 'Enter password' 'Login' 
-; Building connection string 
-_constr='<server_name_or_IP_address> /ssh /1 /auth=password /user=' 
-strconcat _constr _user 
-strconcat _constr ' /passwd=' 
-strconcat _constr inputstr 
-; Openning SSH1 conection 
-connect _constr 
-; Alternative way with hardcoded username and password (not recommended) 
-; The following line replaces lines 5..17 
-; connect '<server_name_or_IP_address> /ssh /1 /auth=password /user=<username> /passwd=<password>' 
-; 
-; Entering synchronous communication mode (useful in most cases) 
-setsync 1 
-; 
-; Assigning new title to TeraTerm window 
-settitle 'Connected to <Server_name_or_site_name>' 
-; 
-
-[MACRO_TEMPLATE SSH1 Session with Public Key] 
-; ******* LogMeTT Macro Template for SSH1 session with public key ******* 
-; Substitute words inside angle brackets with corresponding values 
-; and delete angle brackets. 
-; 
-; Building connection string 
-_constr='<server_name_or_IP_address> /ssh /1 /auth=publickey /user=' 
-; Calling Popup window to get username 
-inputbox 'Enter username' 'Login' 
-strconcat _constr inputstr 
-strconcat _constr ' /passwd=' 
-; Calling Popup window to get password 
-passwordbox 'Enter password' 'Login' 
-strconcat _constr inputstr 
-strconcat _constr ' /keyfile=' 
-; Calling Popup window to get key file name 
-inputbox 'Key file' 'Login' 
-strconcat _constr inputstr 
-; Openning SSH1 conection 
-connect _constr 
-; Alternative way with hardcoded username and password (not recommended) 
-; The following line replaces lines 5..19 
-; connect '<server_name_or_IP_address> /ssh /1 /auth=keyfile /user=<username> /passwd=<password> /keyfile=<private>' 
-; 
-; Entering synchronous communication mode (useful in most cases) 
-setsync 1 
-; 
-; Assigning new title to TeraTerm window 
-settitle 'Connected to <Server_name_or_site_name>' 
-; 
-
-[MACRO_TEMPLATE SEPARATOR] 
-
-[MACRO_TEMPLATE SSH2 Session] 
-; ******* LogMeTT Macro Template for SSH2 session ******* 
-; Substitute words inside angle brackets with corresponding values 
-; and delete angle brackets. 
-; 
-; Openning SSH2 connection using port 22. 
-; User will be prompted for username and password 
-connect '<server_name_or_IP_address> /ssh /2' 
-; 
-; Entering synchronous communication mode(useful in most cases) 
-setsync 1 
-; 
-; Assigning new title to TeraTerm window 
-settitle 'Connected to <Server_name_or_site_name>' 
-; 
-
-[MACRO_TEMPLATE SSH2 Session with Credentials] 
-; ******* LogMeTT Macro Template for SSH2 session with credentials ******* 
-; Substitute words inside angle brackets with corresponding values 
-; and delete angle brackets. 
-; 
-; Calling Popup window to get username 
-inputbox 'Enter username' 'Login' 
-; Assigning the value entered by user to variable _user 
-_user=inputstr 
-; Calling Popup window to get password 
-passwordbox 'Enter password' 'Login' 
-; Building connection string 
-_constr='<server_name_or_IP_address> /ssh /2 /auth=password /user=' 
-strconcat _constr _user 
-strconcat _constr ' /passwd=' 
-strconcat _constr inputstr 
-; Openning SSH2 conection 
-connect _constr 
-; Alternative way with hardcoded username and password (not recommended) 
-; The following line replaces lines 5..17 
-; connect '<server_name_or_IP_address> /ssh /2 /auth=password /user=<username> /passwd=<password>' 
-; 
-; Entering synchronous communication mode (useful in most cases) 
-setsync 1 
-; 
-; Assigning new title to TeraTerm window 
-settitle 'Connected to <Server_name_or_site_name>' 
-; 
-
-[MACRO_TEMPLATE SSH2 Session with Public Key] 
-; ******* LogMeTT Macro Template for SSH2 session with public key ******* 
-; Substitute words inside angle brackets with corresponding values 
-; and delete angle brackets. 
-; 
-; Building connection string 
-_constr='<server_name_or_IP_address> /ssh /2 /auth=publickey /user=' 
-; Calling Popup window to get username 
-inputbox 'Enter username' 'Login' 
-strconcat _constr inputstr 
-strconcat _constr ' /passwd=' 
-; Calling Popup window to get password 
-passwordbox 'Enter password' 'Login' 
-strconcat _constr inputstr 
-strconcat _constr ' /keyfile=' 
-; Calling Popup window to get key file name 
-inputbox 'Key file' 'Login' 
-strconcat _constr inputstr 
-; Openning SSH2 conection 
-connect _constr 
-; Alternative way with hardcoded username and password (not recommended) 
-; The following line replaces lines 5..19 
-; connect '<server_name_or_IP_address> /ssh /2 /auth=keyfile /user=<username> /passwd=<password> /keyfile=<private>' 
-; 
-; Entering synchronous communication mode (useful in most cases) 
-setsync 1 
-; 
-; Assigning new title to TeraTerm window 
-settitle 'Connected to <Server_name_or_site_name>' 
-; 
-
-[MACRO_TEMPLATE SEPARATOR] 
-
-
-[MACRO_TEMPLATE Serial Connection] 
-; ******* LogMeTT Macro Template for Serial connection ******* 
-; Substitute words inside angle brackets with corresponding values 
-; and delete angle brackets. 
-; 
-; Openning Serial connection using COM port. 
-; Valid value for port number is 1..6. 
-connect '/C=<port_number>' 
-; 
-; If COM port is connected to modem the following lines can be used 
-; sendln 'ATZ' 
-; wait 'OK' 
-; ATDT<phone> 
-; 
-; Assigning new title to TeraTerm window 
-settitle 'Connected to <Server_name_or_site_name>' 
-;
\ No newline at end of file

Modified: trunk/installer/teraterm.iss
===================================================================
--- trunk/installer/teraterm.iss	2009-04-07 10:15:40 UTC (rev 3293)
+++ trunk/installer/teraterm.iss	2009-04-07 14:10:17 UTC (rev 3294)
@@ -63,16 +63,7 @@
 Source: ..\cygterm\cygterm.cfg; DestDir: {app}; Components: cygterm; Flags: onlyifdoesntexist uninsneveruninstall; Permissions: authusers-modify
 Source: ..\cygterm\cyglaunch.exe; DestDir: {app}; Components: cygterm
 Source: ..\cygterm\cygterm+.tar.gz; DestDir: {app}; Components: cygterm
-Source: release\LogMeTT_license.txt; DestDir: {app}; Components: LogMeTT
-Source: release\LogMeTT_README.txt; DestDir: {app}; Components: LogMeTT
-Source: release\LogMeTTc.exe; DestDir: {app}; Components: LogMeTT; Flags: ignoreversion
-Source: release\LogMeTT.exe; DestDir: {app}; Components: LogMeTT; Flags: ignoreversion
-Source: release\logmett.chm; DestDir: {app}; Components: LogMeTT
-Source: release\runltt.exe; DestDir: {app}; Components: LogMeTT
-Source: release\KeyFile.ini; DestDir: {app}; Components: LogMeTT
-Source: release\TTLEdit.exe; DestDir: {app}; Components: LogMeTT; Flags: ignoreversion
-Source: release\SynComp.pro; DestDir: {app}; Components: LogMeTT
-Source: release\ttmacro.tpl; DestDir: {app}; Components: LogMeTT
+Source: ..\libs\logmett\setup295.exe; DestDir: {tmp}; Components: LogMeTT; Flags: deleteafterinstall
 Source: ..\ttpmenu\Release\ttpmenu.exe; DestDir: {app}; Components: TeraTerm_Menu; Flags: ignoreversion
 Source: release\ttmenu_readme-j.txt; DestDir: {app}; Components: TeraTerm_Menu
 Source: ..\TTProxy\Release\TTXProxy.dll; DestDir: {app}; Components: TTProxy; Flags: ignoreversion
@@ -337,10 +328,13 @@
 
 [Run]
 Filename: {app}\ttermpro.exe; Flags: nowait postinstall skipifsilent unchecked; Description: {cm:launch_teraterm}; Components: TeraTerm
-Filename: {app}\LogMeTT.exe; Flags: nowait postinstall skipifsilent unchecked; Description: {cm:launch_logmett}; Components: LogMeTT
+Filename: {tmp}\setup295.exe; Components: LogMeTT
 Filename: {app}\ttpmenu.exe; Flags: nowait postinstall skipifsilent unchecked; Description: {cm:launch_ttmenu}; Components: TeraTerm_Menu
 Filename: {app}\Collector\Collector.exe; Flags: nowait postinstall skipifsilent unchecked; Description: {cm:launch_collector}; Components: Collector
 
+[UninstallRun]
+Filename: {app}\uninstall.exe; Components: LogMeTT
+
 [CustomMessages]
 en.task_desktopicon=Create Tera Term shortcut to &Desktop
 en.task_quicklaunchicon=Create Tera Term shortcut to &Quick Launch
@@ -369,11 +363,9 @@
 ja.type_compact=ƒRƒ“ƒpƒNƒgƒCƒ“ƒXƒg[ƒ‹
 ja.type_custom=ƒJƒXƒ^ƒ€ƒCƒ“ƒXƒg[ƒ‹
 en.launch_teraterm=Launch &Tera Term
-en.launch_logmett=Launch &LogMeTT
 en.launch_ttmenu=Launch TeraTerm &Menu
 en.launch_collector=Launch &Collector
 ja.launch_teraterm=¡‚·‚® &Tera Term ‚ðŽÀs‚·‚é
-ja.launch_logmett=¡‚·‚® &LogMeTT ‚ðŽÀs‚·‚é
 ja.launch_ttmenu=¡‚·‚® TeraTerm &Menu ‚ðŽÀs‚·‚é
 ja.launch_collector=¡‚·‚® &Collector ‚ðŽÀs‚·‚é
 en.msg_language_caption=Select Language
@@ -810,4 +802,5 @@
 
 [_ISToolPreCompile]
 Name: makechm.bat
-Name: build.bat; Parameters: rebuild
+; Name: build.bat; Parameters: rebuild
+Name: build.bat



Ttssh2-commit メーリングリストの案内