qemu RX

Fork

qemu-doc.texi: Add RX section.

Describe emulated target specification. And two examples.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

BootLinuxConsoleTest: Test the RX-Virt machine

Add two tests for the rx-virt machine, based on the recommended test
setup from Yoshinori Sato:
https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html

- U-Boot prompt
- Linux kernel with Sash shell

These are very quick tests:

$ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
JOB ID : 84a6ef01c0b87975ecbfcb31a920afd735753ace
JOB LOG : /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
(1/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot: PASS (0.11 s)
(2/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux: PASS (0.45 s)
RESULTS : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0

Tests can also be run with:

$ avocado --show=console run -t arch:rx tests/acceptance/boot_linux_console.py
console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 +0900)
console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
console: Built 1 zonelists, mobility grouping on. Total pages: 8128
...
console: SuperH (H)SCI(F) driver initialized
console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a sci
console: console [ttySC0] enabled
console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a sci

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Based-on: 20190517045136.3509-1-richard.henderson@linaro.org
"RX architecture support"
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

Add rx-softmmu

Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-17-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
pick ed65c02993 target/rx: Add RX to SysEmuTarget
pick 01372568ae tests: Add rx to machine-none-test.c
[PMD: Squashed patches from Richard Henderson modifying
qapi/common.json and tests/machine-none-test.c]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/rx: Restrict the RX62N microcontroller to the RX62N CPU core

While the VIRT machine can use different microcontrollers,
the RX62N microcontroller is tied to the RX62N CPU core.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

hw/rx: Honor -accel qtest

Issue an error if no kernel, no bios, and not qtest'ing.
Fixes make check-qtest-rx: test/qom-test.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-16-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
We could squash this with the previous patch

hw/rx: RX Target hardware definition

rx62n - RX62N cpu.
rx-virt - RX QEMU virtual target.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

Message-Id: <20190616142836.10614-17-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-9-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI,
renamed CPU -> MCU, device -> microcontroller]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
v23 changes.
Add missing includes.

v21 changes.
rx_load_image move to rx-virt.c

v19: Fixed typo (Peter Maydell)

hw/char: RX62N serial communication interface (SCI)

This module supported only non FIFO type.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-8-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/timer: RX62N internal timer modules

renesas_tmr: 8bit timer modules.
renesas_cmt: 16bit compare match timer modules.
This part use many renesas's CPU.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-7-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/intc: RX62N interrupt controller (ICUa)

This implementation supported only ICUa.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-6-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Dump bytes for each insn during disassembly

There are so many different forms of each RX instruction
that it will be very useful to be able to look at the bytes
to see on which path a bug may lie.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-24-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Collect all bytes during disassembly

Collected, to be used in the next patch.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-23-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Emit all disassembly in one prt()

Many of the multi-part prints have been eliminated by previous
patches. Eliminate the rest of them.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-22-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Use prt_ldmi for XCHG_mr disassembly

Note that the ld == 3 case handled by prt_ldmi is decoded as
XCHG_rr and cannot appear here.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-21-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Replace operand with prt_ldmi in disassembler

This has consistency with prt_ri(). It loads all data before
beginning output. It uses exactly one call to prt() to emit
the full instruction.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-20-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: Disassemble rx_index_addr into a string

We were eliding all zero indexes. It is only ld==0 that does
not have an index in the instruction. This also allows us to
avoid breaking the final print into multiple pieces.

Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20190607091116.49044-19-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: RX disassembler

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-5-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/rx: CPU definition

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

Message-Id: <20190616142836.10614-4-ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190607091116.49044-4-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use newer QOM style, split cpu-qom.h, restrict access to
extable array, use rx_cpu_tlb_fill() extracted from patch of
Yoshinori Sato 'Convert to CPUClass::tlb_fill']
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>

target/rx: TCG helper

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

Message-Id: <20190616142836.10614-3-ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190607091116.49044-3-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Removed tlb_fill, extracted from patch of Yoshinori Sato
'Convert to CPUClass::tlb_fill']
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>

target/rx: TCG translation

This part only supported RXv1 instructions.
Instruction manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01us0032ej0120_rxsm.pdf

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-2-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

hw/registerfields.h: Add 8bit and 16bit register macros

Some RX peripheral using 8bit and 16bit registers.
Added 8bit and 16bit APIs.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-11-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

qemu/bitops.h: Add extract8 and extract16

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-10-ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

MAINTAINERS: Add RX

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190607091116.49044-18-ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

virtiofsd pull 2020-02-10

Coverity fixes and a reworked man page.
-----BEGIN PGP SIGNATURE-----
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=cEQ6
-----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20200210' into staging

virtiofsd pull 2020-02-10

Coverity fixes and a reworked man page.

# gpg: Signature made Mon 10 Feb 2020 17:26:29 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* remotes/dgilbert-gitlab/tags/pull-virtiofs-20200210:
docs: add virtiofsd(1) man page
virtiofsd: do_read missing NULL check
virtiofsd: load_capng missing unlock
virtiofsd: fv_create_listen_socket error path socket leak
virtiofsd: Remove fuse_req_getgroups

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs: add virtiofsd(1) man page

Document the virtiofsd(1) program and its command-line options. This
man page is a rST conversion of the original texi documentation that I
wrote.

Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

virtiofsd: do_read missing NULL check

Missing a NULL check if the argument fetch fails.

Fixes: Coverity CID 1413119
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

virtiofsd: load_capng missing unlock

Missing unlock in error path.

Fixes: Covertiy CID 1413123
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

virtiofsd: fv_create_listen_socket error path socket leak

If we fail when bringing up the socket we can leak the listen_fd;
in practice the daemon will exit so it's not really a problem.

Fixes: Coverity CID 1413121
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

virtiofsd: Remove fuse_req_getgroups

Remove fuse_req_getgroups that's unused in virtiofsd; it came in
from libfuse but we don't actually use it. It was called from
fuse_getgroups which we previously removed (but had left it's header
in).

Coverity had complained about null termination in it, but removing
it is the easiest answer.

Fixes: Coverity CID: 1413117 (String not null terminated)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

Pull request
-----BEGIN PGP SIGNATURE-----

iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl5BIR4ACgkQnKSrs4Gr
c8gC9ggAk4npQQyMIgrV8FM3oJfs7sv6hAuyhcnMw4xqNDGw1zTelwSY4Vif9IRu
0dU3xNZKR1LvWqmu5ciShTp8VQ9wtTtGJzI3T90+pweYwa3C3i1go7DXyxAd4EUm
B0HqD3pb9b7X/wwEC1bi8MlGsJCpWqeLHBWXB4C2Gt1Erjo8I3UHKZBWDQTSfwgz
aWBvuxp+H2eIqr6aUyHziF2htGminrmQm8m9oIzx6NXghvfLzo4CPr8m0vOZiWdn
096Y08ZLbCT3IQBfvQDKHRHqPdKGB0MzCdUyN8q+WtApq+dA/HBFGyI2X845iGPf
XY6qMf/TTRHenV7oBwgU8uMzEI4eMw==
=8xC9
-----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Mon 10 Feb 2020 09:23:42 GMT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
hw/core: Allow setting 'virtio-blk-device.scsi' property on OSX host
block: fix crash on zero-length unaligned write and read

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

9p patches:
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer
-----BEGIN PGP SIGNATURE-----
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=oMrh
-----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/gkurz/tags/9p-next-2020-02-08' into staging

9p patches:
- some more protocol sanity checks
- qtest for readdir
- Christian Schoenebeck now official reviewer

# gpg: Signature made Sat 08 Feb 2020 08:38:10 GMT
# gpg: using RSA key B4828BAF943140CEF2A3491071D4D5E5822F73D6
# gpg: Good signature from "Greg Kurz <groug@kaod.org>" [full]
# gpg: aka "Gregory Kurz <gregory.kurz@free.fr>" [full]
# gpg: aka "[jpeg image of size 3330]" [full]
# Primary key fingerprint: B482 8BAF 9431 40CE F2A3 4910 71D4 D5E5 822F 73D6

* remotes/gkurz/tags/9p-next-2020-02-08:
MAINTAINERS: 9pfs: Add myself as reviewer
tests/virtio-9p: added readdir test
hw/9pfs/9p-synth: added directory for readdir test
9pfs: validate count sent by client with T_readdir
9pfs: require msize >= 4096
tests/virtio-9p: add terminating null in v9fs_string_read()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>